Applies to connector build v1.0.6 and higher.

By default, only the ethernet cable is used for network connections. It is possible to define Wifi settings if required.

For this, open the attached "wpa_supplicant.conf" in a text editor, and modify the corresponding fields to match your settings:

ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev

  ssid: "your_network",
  psk: "your_password"

Save the textfile as "wpa_supplicant.conf" on your enrollment USB stick, and insert it into each Connector Box you want to configure with these settings.

If you want to include certificate files, you can put them in a folder on your USB stick with the following name: "wpa_supplicant_certs". Please refer to the files in the conf file using the following path: "/data/wpa_supplicant_certs/mycert.crt".